Spare Tyre in a Different Size: What’s Safe in Australia

A spare tyre in a different size is normal, and it is fine as a short-term fix. Most cars sold today carry a smaller space-saver, and Australian rules allow a temporary-use tyre to be fitted in an emergency. The catch is that it is built to get you to a tyre shop, not to carry on as usual. Keep to the speed and distance limits, get the proper tyre back on, and you are using it the way it was designed.
TL;DR
- A space-saver spare is deliberately a different size. Australian road rules make an exception for a tyre used in an emergency as a temporary replacement.
- Roadside clubs give a rule of thumb of about 80 km/h and no more than roughly 80 to 100 km. Your owner’s manual and the tyre sidewall have the exact limits for your car.
- A space-saver won’t grip, steer or brake like a normal tyre, so drive gently and replace it quickly.
- Never run a mismatched full-size tyre on the same axle as a different one, and never fit a compact spare to a regular wheel.
- Check your spare’s size and pressure now, before you need it. We can fit the right tyre the same day in Melbourne and Perth.
Table of Contents
- Why your spare is often a different size
- What Australian rules say about mismatched sizes
- How fast and how far you can drive on a space-saver
- What changes when you drive on a different-size spare
- A full-size spare that is slightly different
- How to find the right spare for your car
- When to replace the space-saver with a proper tyre
- Our view on spares and sizing
- Get the right tyre fitted
- FAQ
- Sources
Why your spare is often a different size
Open the boot floor of a modern car and you will often find a narrow wheel with a bright rim. That is a space-saver, also called a temporary-use or compact spare. It is smaller than your road tyres by design. The saving is boot space and weight, and it keeps the cost of the car down.
There are three common set-ups:
| Spare type | What it is | Typical use |
|---|---|---|
| Full-size matching spare | Same size, shape and ideally the same brand and age as your fitted tyres | Can be rotated in and used long term |
| Full-size spare, different wheel | Same overall tyre size, but a steel wheel instead of alloy, for example | Usually fine for general use if the size matches |
| Space-saver (temporary use) | Narrower, lighter, smaller wheel and tyre | Emergency only, to reach a tyre shop |
Some 4x4 and ute owners also end up with a spare that is close to, but not exactly, the fitted size. This happens after fitting larger tyres, or when a spare was bought second-hand. That is a different situation, and we cover it below.
RAA, the South Australian motoring club, says tyres must be the size and construction the manufacturer describes. It adds that two tyres on the same axle should always match. A temporary spare is the planned exception to that rule.
What Australian rules say about mismatched sizes
The national Light Vehicle Standards Rules set the baseline. In summary, they say that wheels and tyres on an axle must be of sufficient size and capacity to carry the load on that axle. They also say that tyres of different carcass construction must not be fitted to the same axle. The same document carves out an exception for a tyre being used in an emergency as a temporary replacement.
In plain terms, running a space-saver after a flat is allowed. Leaving it on for weeks is not what the exception is for.
The UK’s AA describes a similar principle there: tyres on the same axle must match in size and aspect ratio, with an exception for temporary spares fitted in an emergency. That is a British source, and Australian state and territory rules apply on our roads, but the logic is the same.
Modifications are a separate matter. Transport Tasmania, for example, says that tyre ratings must comply with the lesser of the manufacturer’s placard ratings or the national VSB 14 requirements. Vehicles fitted with alternative rims or tyres have to meet VSB 14, or they are not to be passed fit for registration. Other states have their own details, so check with your state road authority if you have changed wheel or tyre sizes.
How fast and how far you can drive on a space-saver
The short answer is slowly, and not far. The numbers differ between sources because they differ between cars.
- RAC WA gives a rule of thumb of not much more than 80 km at 80 km/h. It says the limit varies by tyre make, and the tyre’s job is to get you to the nearest repair shop.
- RAA says temporary-use spares are usually limited to a lower speed and should not be driven on for more than 100 km.
- NRMA says space-savers are usually limited to 80 km/h, and that you should always follow the manufacturer’s guidelines because it can vary.
Manufacturers publish their own limits. An Australian-market Ford specification sheet for one model says that if the spare differs from the other wheels, the car should be driven with caution, not exceeding 80 km, and the standard wheel fitted as soon as possible. A Hyundai i30 N manual says to keep speed at or below 80 km/h while the compact spare is fitted. It also says not to fit chains to that wheel or tow a trailer.
The pattern is clear. Treat 80 km/h and about 80 km as the safe planning figure, and use your own manual for the real one.

Inflation pressure matters more than most people expect
Compact spares usually run at a much higher pressure than normal tyres. Manuals for a Toyota Verso and a Hyundai i30 N both specify 420 kPa (60 psi). Your car may differ, so look at the sidewall or placard. A spare that has sat for years is often soft, so check its pressure a few times a year.
Where to fit it
NRMA says a space-saver should ideally go on the back wheels rather than the steered front wheels. On a front-wheel-drive car, that can mean moving a good rear-axle tyre to the front, if you can do so safely and your manual does not forbid it. The UK AA also notes that some spares are restricted to “front only” or “back only” to avoid interfering with braking components or the transmission. Follow your handbook.
What changes when you drive on a different-size spare
Grip, steering and braking
NRMA is direct about this. Space-savers don’t grip the road as well as normal tyres, which reduces steering and stopping ability, especially in an emergency avoidance manoeuvre. It also says they are safe and cost-effective when used to manufacturer specifications. So brake earlier, take corners gently and leave a bigger gap in wet weather.
ABS, stability control and the diameter gap
A smaller wheel turns faster than its neighbours. Modern cars compare wheel speeds, and a mismatch can confuse the systems. One Kia manual says that different tyre sizes can make ABS and ESC work irregularly. The same manual says a compact spare is not designed to go on a regular-size wheel, and a compact spare wheel is not designed to take a regular tyre. Do not mix and match these parts.

If a warning light comes on after you fit the spare, that is usually the system reacting to the size difference. Slow down, finish the trip to the tyre shop, and ask the fitter to check the lights clear once your normal tyre is back on.
Towing
The Toyota and Hyundai manuals above both say not to tow while a compact spare is fitted. If you pull a caravan or trailer, that matters. It is a good reason to plan for a full-size spare.
A full-size spare that is slightly different
Forum threads often describe a 4x4 whose spare is a size off the other four. One Patrol owner worked out that a 275/70 spare was about 4 cm smaller in circumference than 265/75 tyres. Treat a case like that with care, because the same-axle rule is the point. A few millimetres of difference as a short-term fix is one thing. Running a different-circumference tyre on one side of an axle for months is another, since it can wear differentials and upset traction systems on a 4WD.
For full-size spares, the practical checks are:
- Same overall diameter. Compare the sidewall markings and use a size calculator. Our guide to calculating tyre size within Australian limits explains how.
- Load index at or above the car’s requirement. See our note on what a load index means.
- Same construction. Don’t mix radial and cross-ply on one axle.
- Age. An old spare can be sound-looking and still perished. Read the date code with our tyre age guide.
- Wheel fitment. The rim, bolt pattern and offset need to suit the hub. Our wheel vs tyre size explainer shows how rim and tyre measurements relate.
And if you tour remote areas, RAC WA says a full-size spare may be the safer option for regular regional and remote road trips.
How to find the right spare for your car
You have three places to look, in this order.
- Owner’s manual. It lists the spare type, size, pressure and speed limit.
- Tyre placard. This is usually on the driver’s door jamb, though it can sit inside the fuel flap or glovebox. It gives the fitted tyre sizes and pressures.
- The spare itself. The sidewall shows the size, for example a T-prefixed code for a temporary tyre, plus the maximum speed and pressure.
The sidewall of a normal tyre reads something like 225/40 R18, where 225 is the width in millimetres, 40 the aspect ratio and 18 the rim diameter in inches. Our tyre size directory lists common fitments, and our guide to which tyres fit your car shows how to search by registration. If you are considering sizes beyond the standard one, read about tyre size equivalents and Australian limits first.
Check it before you need it
A two-minute check at home saves a bad day on the roadside:
- Is the spare there, and is the jack and wheel brace with it?
- Is the pressure right for that tyre?
- Does the date code show an old tyre?
- Is there visible cracking on the sidewall?
- Do you know where the locking wheel nut key lives?
When to replace the space-saver with a proper tyre
The space-saver has done its job when you reach a fitter. At that point you have two choices: repair the damaged tyre if it can be repaired, or replace it. If you are replacing it, also look at the other tyres on that axle. Two tyres on one axle should match, so a single new tyre next to a well-worn one is worth discussing with the fitter. Our fitters can advise on this when you book.
It is also a good moment to think about whether you want a full-size spare for your next trip, especially if you tow, travel remotely or drive a ute or 4x4.
Our view on spares and sizing
We see the same story often. A driver gets a flat, fits the small spare, and then spends the afternoon ringing around for a tyre that fits and a fitter who has time.
Our approach is to take that scramble out. You can search by car model or tyre size, see the price laid out up front, choose a local fitter, and get same-day fitting confirmation. Checkout is designed to take about three minutes.
The size question is where most mistakes happen, so we built a tyre size calculator and an AI-powered tread check tool to help you choose with confidence. We would rather you get the right size the first time than guess from a forum thread.
If you want to see how a different tyre looks on your car, our augmented reality view lets you try it before you buy. Pair that with a verified local fitter and the space-saver can go back in the boot where it belongs.
Areesh
Get the right tyre fitted
If a space-saver is on your car right now, the quickest way out is to book a replacement. Search by model or size on Treadivo’s tyre range, covering passenger, SUV and 4x4, light truck, commercial, mud terrain, highway and motorcycle tyres, and pick a local fitter.

We fit across Melbourne and Perth. See tyre fitting in Melbourne or tyre fitting in Perth for local details. You will see the price before you pay, with no hidden fees.
FAQ
Is it legal to drive with a spare tyre that is a different size?
Yes, for emergency use. The national Light Vehicle Standards Rules include an exception for a tyre being used in an emergency as a temporary replacement. It is meant to get you to a repairer, not to be a permanent set-up. Rules on modified wheels and tyres vary by state, so check with your road authority.
How far and how fast can I drive on a space-saver?
A common rule of thumb from Australian motoring clubs is about 80 km/h and around 80 to 100 km. The exact limit depends on your car and the tyre, so follow your owner’s manual and the markings on the spare.
Can I put a space-saver on the front wheels?
Ideally not. NRMA advises fitting it on the back wheels rather than the steered front ones. Some manuals restrict a spare to one axle, so read yours. If the flat is on the front, a fitter or roadside service can advise on moving a good tyre across.
Can I use a bigger or smaller full-size tyre as a spare?
Only if the overall diameter, load index and construction match what the manufacturer specifies for your car. Even then, it is best used briefly. Two tyres on the same axle should always match for normal driving.
Should I carry a full-size spare instead?
If you drive in regional or remote areas, or tow, a full-size spare is often the safer choice. Make sure it matches the wheel size, load rating and age of your fitted tyres, and check its pressure regularly.
Sources
- Help centre, Tyres | RAA
- Australian Light Vehicle Standards Rules 2015
- Guide to spare wheels and space saver tyres | The AA
- Transport Tasmania, vehicle standards
- Space Saver Tyres, Inflator Kits and Run Flat Tyres | RAC WA
- How far can I drive on a space saver tyre? | NRMA
- 2011 Ford Fiesta ECOnetic Australian specification sheet
- 2023 Hyundai i30 N Owner’s Manual, RHD (UK, Australia)
- 2011 Toyota Verso Owner’s Manual
- Kia owner’s manual, 2021
