TREADIVO.

Rolling out across Australia

Choose your location.
Back to blog

Tyre Noise Rating: What the dB Figure Tells You

Sketches framing the tyre noise rating title

A tyre noise rating is a decibel (dB) figure for how loud a tyre is outside your car as it rolls past at a set speed. It is not a measure of how loud the tyre will be in your cabin. Use it to compare tyres of the same size, and treat it as one input alongside size, load, speed and how your car is set up. When you search by size on Treadivo, you can shortlist tyres that fit your car first, then use the noise figure to separate them.

Treadivo
Compare Tyres That Fit Your Car
Search for tyres by vehicle or size, compare options with transparent pricing, and find local fitters through Treadivo.

TL;DR

  • The noise rating on a tyre label is measured outside the vehicle, in A-weighted decibels, with the tyre passing a microphone at around 80 km/h.
  • The class letter (A, B or C) is set against legal limits, so it varies by tyre size and type. Compare ratings only between tyres of the same size.
  • A lower dB figure means a quieter tyre outside, but cabin noise also depends on the road, your car and how sound travels through the wheel and body.
  • Most tyres sit in class B, so the dB number often tells you more than the letter.
  • Check size, load index and speed rating first, then use noise to choose between the tyres that fit.

Table of Contents

What a tyre noise rating actually measures

When a manufacturer publishes a noise rating, it is describing external rolling noise. According to the European Commission’s tyre properties guide, a microphone is placed at the ear height of an average tall person beside the track. The vehicle passes it eight times at about 80 km/h for car and van tyres, or about 70 km/h for bus and truck tyres. The result is expressed in dB(A), where the “A” means the measurement is weighted to match how the human ear responds to different pitches.

Two things follow from that test:

  1. The figure describes a standardised pass-by, not your commute. Your road surface, speed and car are all different.
  2. It measures sound radiated to the people standing beside the road, which is why GOV.UK’s tyre labelling guidance states the label shows external noise and not any tyre noise heard inside the vehicle.

The rating comes from the European Union’s tyre label. It is the only standardised noise figure most drivers will ever see on a tyre, so it is worth knowing how to read it.

How to read the label: dB, waves and letters

The noise section sits at the bottom of the label with a loudspeaker symbol. It carries two pieces of information.

The decibel number

This is the measured level, rounded to the nearest whole number. A lower number is a quieter tyre outside the car. The decibel scale is logarithmic, so small differences matter more than they look. Tire Review reports that a one-wave tyre is half as noisy as a two-wave tyre. As a rule of thumb for the scale, every 3 dB is a doubling of sound energy, which is why a tyre 4 dB quieter than another is a real step and not a rounding error.

The class letter (or the older sound waves)

The European Commission explains that the classes A, B and C are not set directly by the measured dB. They are set against the limits in UN ECE Regulation 117. Those limits vary by tyre class (passenger car, van, bus or truck) and by approval year. Wider passenger-car tyres have higher limits than narrower ones, winter and XL tyres get a 1 dB(A) allowance, and the limits became more stringent from January 2023.

In practical terms, the letter tells you how a tyre performs against the limit for its own category:

Class What it means against the limit
A Quietest: 3 dB or more below the current limit for that product
B Meets the limit
C Above the limit, so the loudest class

Older labels showed one, two or three black sound waves instead of a letter. One wave is the quietest and three is the loudest.

The Commission’s page also notes that most tyres fall into class B and that class C is almost unpopulated. That has a useful consequence: because nearly everything sits in B, the letter rarely separates two tyres. The dB figure does.

Why the rating does not tell you how loud the cabin will be

This is where most drivers get caught out. A tyre with a lovely low dB figure can still produce a drone inside a particular car, and a tyre with an average figure can feel quiet in another.

An academic paper presented at the ISMA 2014 conference, by Abbadi and Gaudin, describes two routes by which tyre noise reaches the cabin:

  • Air-borne: sound passes through the body panels and glass. This dominates above roughly 400 Hz (the higher-pitched hiss).
  • Structure-borne: vibration travels through the tyre, wheel, the air cavity inside the tyre and the axles into the body. This dominates below about 400 Hz (the low rumble and boom).

The external pass-by test captures mostly the first kind of problem. The rumble you feel on coarse chip-seal depends heavily on the second, which is shaped by your car’s suspension, wheel and body. Two identical tyres can sound different in a hatchback and in an SUV.

If you want the practical side of low-frequency hum, our guide to tyre noise reduction covers research-backed fixes for cavity hum, and the checklist in New Tyres Noisy? 5 Checks Before You Call the Fitter helps when a fresh set sounds louder than you expected.

The road matters as much as the tyre

The surface you drive on changes the result. An Australian Acoustics Society paper on tyre and road noise measurements in Queensland measured noise across 22 road surfaces. It found a range of about 5 dB(A) within 100 m test sections. That is bigger than the gap between many tyres on a label. In the same study, the Australian-made passenger tyre tested ran on average 2.6 dB(A) quieter than one reference tyre and 3.0 dB(A) quieter than another, so tyre choice matters too, but road texture can swamp it.

Road surface noise range beside tyre differences

So a sensible expectation is this: a quieter-rated tyre should be quieter on the same road, but the road will often decide how the drive feels.

Tread design: why some tyres hum

Tread blocks hitting the road create a repeating sound. If the blocks are all the same length, that repetition becomes a single annoying tone. A 2023 INCE paper by Yoshinori Saito explains that mono-pitched tread patterns produce strongly annoying tonal noise. That is why passenger-car tyres use variable-pitch tread, with element lengths deliberately randomised so the noise spreads across frequencies and sounds like a softer hiss.

This also explains why chunky mud-terrain and some light-truck tyres tend to sound different from a smooth highway or passenger tyre: bigger, more open tread blocks are a different noise problem. If you drive a 4x4 and also want a calmer ride, compare highway-terrain options within your size, not across categories.

Tread design: why some tyres hum

Compare like with like: size first

The limits behind the letters change with tyre width, so a class A on a narrow tyre and a class A on a wide tyre do not represent the same decibel level. Tire Review notes that noise compliance can be compared only between tyres of the same size, because narrower tyres have lower targets than wider ones.

That gives you a simple order of operations:

  1. Lock in your size, load index and speed rating. These come first and are not negotiable. If you are unsure, the Treadivo tyre size calculator and our guide to tyre load index take you through it.
  2. List the tyres in that exact size.
  3. Compare their noise figures. A gap of 2 to 3 dB between two same-size tyres is meaningful.
  4. Then weigh up the rest: wet grip, rolling resistance and price.

The label covers only a few aspects of a tyre. Wet grip and fuel efficiency are the other two, so noise should not be the only thing you decide on. If you are also weighing alternative sizes, the guide to tyre size equivalents and Australian limits shows what is allowed. The same logic applies if your car runs a different front and rear setup: read about staggered versus square setups and compare noise only within each matching pair.

A worked example

Suppose you are choosing between two tyres in 215/55R16 93H:

  • Tyre one: 68 dB, class B.
  • Tyre two: 71 dB, class B.

Both share the same letter, so the letter says nothing. The 3 dB gap says tyre one makes roughly half the sound energy of tyre two outside the car. Both pass legal limits, but if low noise is a priority, tyre one is the better candidate, provided grip and price also suit you.

For reference, a tyre in this size that appears on Treadivo is the Yokohama ADVAN dB Decibel V551 215/55R16 93H. In 235/50R20, there is the Kumho VS73 ENNOV SPORT (EV)(SILENT). Check each tyre’s own listing for the details it publishes.

What else changes how noisy your tyres are

Even with a good rating, several things in your own hands shape what you hear:

  • Tyre pressure. Under- or over-inflated tyres change the contact patch and can change noise. Check pressures against the placard in your door jamb.
  • Uneven wear. Cupped or feathered tread can create a rhythmic hum that grows with speed. Rotation and alignment keep wear even, and an alignment booked alongside your fitting is an easy way to protect a new set.
  • Tyre size. Wider, larger tyres put more rubber on the road and generally have higher noise limits.
  • Road surface. As the Queensland study shows, the same tyre can sound quite different from one surface to the next.
  • Not the tyres at all. A hum that stays the same on every road surface and changes when you steer can come from somewhere else. A worn wheel bearing is one example, and a guide on what wheel bearing noise sounds like will help you tell the difference.

Is a noise label required in Australia?

The label is an EU requirement, set out under European regulation, and it is where the A to C classes and decibel figures come from. That is why Australian listings that quote a noise figure are usually using the European system, and why the way to read it is the way described above. Where a tyre listing has no noise figure, that does not mean the tyre is loud. It means you should compare on the other points you can verify, and use size, category and tread type as a guide.

Choosing a quieter tyre with Treadivo

Here is the routine we would follow if low noise were a priority for you:

  1. Search by car model or tyre size. You see only tyres that fit.
  2. Narrow by category. Passenger and highway tyres suit most commuters. SUV and 4x4 buyers can compare within their own category rather than against passenger tyres.
  3. Compare the noise figure between same-size options. Prefer the lower dB.
  4. Use the AR view. Treadivo’s augmented reality feature lets you see how the tyres will look on your car before you buy.
  5. Check your current tread. Treadivo’s AI-powered tread check tool helps you see whether wear is part of the noise you hear now.
  6. Choose a local fitter and check out. Checkout takes about three minutes, with itemised pricing and no hidden fees, and you receive a same-day fitting confirmation.

We build Treadivo around one idea: you should be able to choose tyres with the same clarity you would expect from any other purchase.

A noise rating is a good example. It is useful, but only if it is compared properly, within one size, between tyres that actually fit your car. That is why we start with your car model or tyre size, so that every tyre you see is a real option. Then you can use the noise figure for what it is good at: separating two tyres that are otherwise equal.

We also think the rating is only half the story, because a quiet tyre fitted badly or run at the wrong pressure will not stay quiet. That is why we pair every purchase with a booked fitting from a local fitter and offer alignment, so the tyres you choose are installed and set up properly.

Our advice: pick your size, compare the dB between the tyres that fit, then let the fitting confirmation take care of the rest.

Areesh

Book quieter tyres and your fitting in one go

Once you have your size and a noise figure you like, you can order and book your fitting together. Treadivo lists passenger, SUV and 4x4, commercial, mud terrain, highway, light truck, truck and motorcycle tyres at treadivo.com.au/tyres, with fitting through local partners. If you are in Perth or Melbourne, see the pages for tyre fitting in Perth and tyre fitting in Melbourne.

Treadivo

If you would like to browse by manufacturer first, the tyre brands directory lists them all, and our blog of tyre guides covers sizing, load and speed ratings in more depth.

FAQ

What is a good tyre noise rating?

On the European label, a lower decibel figure is better. A class A tyre is at least 3 dB below the current limit for its category, and most tyres sit in class B. Because limits differ by tyre width, a good rating is one that is low compared with other tyres of the same size.

Does the noise rating tell me how quiet my car will be inside?

No. The label figure describes noise radiated outside the vehicle. What you hear in the cabin also depends on the road surface, your car’s body and suspension, and how vibration travels through the wheel. Use the rating to compare tyres, and expect the cabin experience to vary by car.

What do the three sound waves on a tyre label mean?

Older labels used one to three black waves for external noise: one is the quietest and three is the loudest. Current labels use the letters A, B and C in the same order. Both sit alongside the decibel figure, which is the more precise number.

Can I compare noise ratings between different tyre sizes?

Not reliably. The limits behind the classes are set by size, with narrower tyres having lower targets than wider ones. Compare ratings between tyres of the same size and you will be making a fair comparison.

Why do my new tyres sound louder than expected?

Common causes are tyre pressure, a rough road surface, an uneven tread pattern on a different set or a problem unrelated to the tyres. Our five checks for noisy new tyres walk you through them in order.

Sources

Ready for new tyres?

Search your tyre size and see live prices, with fitting or pickup anywhere in Australia.