When to Buy Tyres: Signs, Timing and Sale Periods in Australia

Buy tyres when a safety trigger says so, and use sale periods only when your tyres are still safe. The triggers are tread at or near 1.5 mm, tyres five to six years old or more, or damage such as bulges, cracks and cuts. If none of those apply, the end of the financial year, Black Friday and Boxing Day are the windows where Australian tyre prices tend to dip.
This guide shows you how to read your own tyres, how to time a purchase around a sale, and how to book a fitting so the job is done fast.
TL;DR
- Replace now, don’t wait for a sale, if tread is at the wear indicators (1.5 mm legal minimum), the tyre is damaged, or it looks unsafe.
- Tyres five to six years old deserve a professional check, even with good tread. Past ten years, replace them.
- If your tyres are safe, buy around the end of the financial year (June), Black Friday (late November) or the post-Christmas sales.
- Start shopping when tread reaches about 3 mm, so you can compare options instead of buying in a rush.
- Check size and fitment before you order, then book a local fitter at checkout.
Table of Contents
- The short answer: buy before you need to
- Signs you need new tyres now
- The 3 mm rule of thumb: when to start shopping
- The best time of year to buy tyres in Australia
- Buying before a road trip
- Make your tyres last until the right moment
- Get the size and fitment right first
- Buy and book in one go
- A quick buying checklist
- FAQ
- Sources
The short answer: buy before you need to
The best time to buy tyres is shortly before you have to. That gives you room to compare brands, wait for a sale and book a fitting slot that suits you. Buying after a blowout or a failed roadworthy inspection means paying whatever is available this week.
Three things decide the timing:
- Tread depth. The legal floor and the point where wet grip starts to fade are different numbers.
- Age. Rubber ages whether or not the car moves.
- Condition. Damage can end a tyre’s life on day one.
Whichever of these runs out first sets your deadline. Sales only matter once you know how much time you have.
Signs you need new tyres now
Tread at or below 1.5 mm
In Australia, car tyres must have at least 1.5 mm of tread in all principal grooves. Vehicle Standards Information 16 also requires that tyres be built and certified for normal road use and not show excessive uneven wear across their width. RACV confirms that tyres below 1.5 mm are unroadworthy.
Every tyre has tread wear indicators moulded into the grooves. Michelin Australia explains that once the tread is flush with an indicator, the tyre has reached its legal wear limit and needs replacing immediately. Michelin also suggests measuring at several points across the tyre rather than trusting one reading.
Our guides walk through the details: the 1.5 mm rule explained and how to check tread depth.
Damage you can see
Sidewall bulges, cracks and cuts are reasons to replace a tyre now, as is uneven wear. RACV lists these signs alongside the tread limit. Uneven wear also tells you something about the car. Inner or outer edge wear and cupping point to different causes, such as alignment or suspension issues. Fix the cause when you fit new tyres, or the new set wears the same way. Our own page on spotting uneven tyre wear before you book a fitter covers the patterns in more detail.

Age, even with plenty of tread
RACV advises getting professional advice on tyres more than five or six years old. Continental Tyres Australia goes further: tyres, including spares, made more than ten years ago should be taken out of service and replaced, even if they look fine. It adds that you can’t judge age-related deterioration, such as rubber cracking, by eye alone.
You find the age in the DOT code on the sidewall. Our guide to reading the tyre date code shows how to spot a ten-year-old tyre, and tyre age in Australia, law versus manufacturer advice explains where the rules end and the advice begins. If you want a second look at sidewall ageing, a short read on spotting tyre dry rot shows what surface cracking looks like.
The 3 mm rule of thumb: when to start shopping
The legal limit is the last safe moment, not the ideal one. Tread grooves move water out from under the tyre. RACV explains that as grooves get shallower, a tyre clears less water, so wet grip drops and braking distances grow well before the legal limit. It adds that some tyre companies recommend replacement at 3 mm for better wet-weather grip.
Bridgestone notes that worn tread raises hydroplaning risk in rain, and that hot weather speeds up wear. Autumn and spring can bring sudden downpours and leaf debris.
So treat 3 mm as your cue to start comparing prices. Treat 1.5 mm as the point where the car shouldn’t be driven on those tyres. The gap between the two is your window to buy smart.

The best time of year to buy tyres in Australia
When your tyres are still safe, timing a purchase around a sale can make sense. Tyre pricing in Australia follows the retail calendar. Price roundups point to these recurring windows:
| Window | When | What to expect |
|---|---|---|
| End of financial year | June into early July | Promotions that suit businesses and tradies buying before 30 June |
| Footy finals | September | Retailer promotions tied to the finals |
| Black Friday and Cyber Monday | Late November | Often the sharpest online pricing of the year |
| Boxing Day to New Year | Late December to January | Post-Christmas sales |
| Brand cashback cycles | Rotating through the year | Manufacturer rebates on major brands |
Promotions change each year, so check the current terms before you commit. Cashback offers usually have claim deadlines and eligibility rules.
A simple way to use this
- Tread above 4 mm and tyres under four years old: you can wait for the next sale window.
- Tread around 3 mm: book your purchase for the next window inside the next two or three months, and keep an eye on wear.
- Tread near 1.5 mm, damage or a very old tyre: buy now. A saving on a sale is never worth driving on an unsafe tyre.
The last point is worth repeating. The same roundup warns that tyres at or below the 1.5 mm limit, or clearly unsafe, should be replaced now rather than held for a sale.
Does the season matter?
In most of Australia, you don’t buy tyres by season the way northern-hemisphere drivers do with winter sets. Instead, think about when you’ll need the grip. If you’re heading into a wet stretch, or you’ve got a summer road trip planned, have your tyres sorted a few weeks earlier. That avoids last-minute availability problems on the size you need.
Buying before a road trip
A long trip is a good deadline for a tyre purchase. RACV advises keeping a record of when your tyres were last replaced, checking pressure at least every fortnight and before a long trip, and, for remote travel, carrying a suitable spare and the tools to change it.
A pre-trip tyre check takes ten minutes:
- Check tread depth at several points across each tyre.
- Look for cracking, bulges and cuts on the sidewalls.
- Check the spare. It’s a tyre too, and it ages. Continental’s ten-year advice includes spares.
- Set pressures for your load using the owner’s manual. Camping Australia’s road-trip checklist recommends adjusting for heavy loads and softer surfaces this way, even after a fresh service.
If any of these fail, buy before you leave, not at a remote roadhouse where choice is limited.
Make your tyres last until the right moment
Good habits stretch the time between purchases and give you control over timing.
- Rotate regularly. Michelin Australia recommends rotating roughly every 8,000 to 10,000 km.
- Replacing only two tyres? Michelin advises fitting the new or least worn pair on the rear axle for better control.
- Keep pressures right. Under-inflation wears the shoulders faster.
- Fix alignment problems early. Uneven wear is the quickest way to bring a replacement forward.
If your car pulls to one side or the wear pattern looks odd, ask about alignment when you book your new tyres.
Our view on timing
Most people buy tyres at the worst moment: after a puncture, a sidewall bulge or a roadworthy fail. That is when you have the least time to compare, and the least chance to read what you are paying for.
We built Treadivo around the opposite habit. Search by car model or tyre size, see pricing laid out clearly, and choose a local fitter near you. Our aim is no hidden fees, a checkout designed to take about three minutes, and same-day fitting confirmation.
Our tools are designed to help you act early. The AI-powered tread check tool is there to help you see where your tyres are at, and the tyre size calculator helps you confirm the right fit. The AR feature lets you preview how a set looks on your car before you order.
Our advice is simple: when you first notice your tread nearing 3 mm, start looking. Do it while you still have choices.
Areesh
Get the size and fitment right first
Buying at the right time only helps if the tyre is right. Check the size on your current sidewall and your car’s placard, and confirm load and speed ratings. Our guide to verifying tyre fitment before you buy walks through it. If you drive an SUV or ute, the choice between road and off-road patterns matters too: see highway versus all-terrain tyres.
For a specific size example, our page on 265/60R18 tyres online shows the process in practice. More reading is in our tyre guides and buying advice.
Buy and book in one go
When it’s time, shop tyres online at Treadivo. You can search by car model or tyre size, pick from passenger, SUV and 4x4, commercial, mud terrain, highway, light truck, truck and motorcycle categories, and choose a local fitter in your area.

We operate in Melbourne and Perth, with fitting pages for tyre fitting in Melbourne and tyre fitting in Perth. Pricing is itemised, and you get same-day fitting confirmation once you check out.
A quick buying checklist
- Measure tread across each tyre and note the lowest reading.
- Read the DOT date code on all tyres, including the spare.
- Look for sidewall damage and uneven wear.
- Decide: buy now (1.5 mm, damage, very old) or plan (about 3 mm and rising).
- Confirm size, load and speed rating.
- Compare itemised prices, including fitting.
- Book a fitter near you and confirm the slot.
FAQ
How often should I replace my tyres?
There is no single distance or date. Replace when tread reaches the wear indicators, when there is damage, or when age raises concern. RACV advises a professional opinion on tyres more than five or six years old, and Continental advises replacing tyres more than ten years old regardless of appearance.
Is it better to buy tyres on sale?
Yes, if your tyres are still safe and you have time. Common sale windows are the end of the financial year, Black Friday and the post-Christmas period. If tread is near the legal limit or a tyre is damaged, replace it now.
Are seven-year-old tyres too old?
Not automatically illegal, but worth a professional inspection. RACV advises seeking advice once tyres pass five or six years, and you can’t judge age damage by eye. Check the DOT code and have a fitter look at the sidewalls.
Should I replace two tyres or all four?
If only two need replacing, Michelin Australia advises fitting the new or least worn tyres on the rear axle for better control. If all four are worn or old, replacing the full set keeps grip even. A fitter can advise for your vehicle.
Sources
- RACV: Tyre maintenance, roadworthy checks and when to replace them
- Vehicle Standards Information 16: Tyre maintenance
- Continental Tyres Australia: Replacing tyres
- Michelin Australia: How to check your car tyre tread
- Michelin Australia: Tyre rotation
- Bridgestone Australia: Tyre tread depth
- Camping Australia: 8-point road-trip checklist
- Best time of year to buy tyres in Australia
